Sheet stamping part Casting characteristics and main product

Major Product:

Application of sheet stamping part

Widely used in the manufacture of a variety of cold stamping parts, such as various instruments and machine shell and so on.


Product Detail

Product Tags

Sheet Stamping Part Specific Parameter 

1.Common materials for production

Cold Rolled Sheet Steel 

GB ASTM ISO JIS DIN NF ГOCT BS T:mm
Q195 A285MGr. B HR2 —— S185St331.0035 S185(A33) CT.1kЛ S185040A10 T=0.5,T=0.8,T=1.0,T=1.2T=1.5,T=2.0,T=2.5T=3.0
Q215 A283MGr. CK02501 HR1 SS330(SS34) Ust34-21.0028 A34 CT.22kЛ2,-3 040A12
Q235 A570 Gr. A Fe360A SS400(SS41) S235JR ,1.0037(St37-2) S235JR CT.3kЛ2 S235
Q275 K02901 Fe430A SS490(SS50) S275 1.0144 S275 CT.5kЛ-2 S275
SPCC cold plate has good surface quality and high dimensional accuracy. It is often used in automobile, household appliances and other manufacturing fields. SPCC
08, 08F 1008 S9CK USt4  1.0336 XC6 08 040A04 T=0.5T=0.8T=1.0,T=1.2T=1.5,T=2.0,T=2.5T=3.0
10 1010 G10100 S10C C10   1.0301XC10  1.1121 C10XC10 10 040A10045M10
15 1015 G10150 S15C C15   1.0401Ck15  1.1141 C12XC15 15 040A15080M15
25 1025 G10250 C25E4 S25C C25E  Ck25 1.1158 C25E XC15 25 C25E 070M26
High quality carbon structural steel with good drawing performance, used in the manufacture of a variety of cold stamping parts, such as  various instruments and machine shell and so on.

Stainless Steel Sheet 

GB ASTM ISO JIS DIN NF ГOCT BS EN
1Cr13 410 S41000 X12Cr13 SUS410 X10Cr13 1.4006 Z12C13 12X13 410S21 X12Cr13  1.4006
Used for deep drawing, stamping, bending, crimping and other cold machining.
0Cr18Ni9 304 S30400 X5CrNi18-10 SUS304 X5CrNi18-10 .4301 Z6CN18.09 08X18H10 304S15 X5CrNi18-10 1.4301
Used for stamping gasket and other products
1Cr18Ni9 302 S30200 —— SUS302 X12CrNi18-8 1.4300 Z10CN18.09 12X18H9 302S25
Used for stamping and welded parts with good weldability.
1Cr18Ni9Ti 321 S32100 X10CrNiTi18-10 SUS321 X12CrNiTi18-9  1.4878 Z6CNT18.12 12X18H10Ti 321S20 X10CrNiTi18-10 1.4878
Used for stamping and welded parts with good weldability.

Aluminum and Aluminum Alloy Plates 

GB ASTM ISO JIS DIN NF ГOCT BS

Application

2A25L1 1070 AL99.7 A1070 AL99.7 1070A A00 - Common materials for cold extrusion, for deep drawing and stamping parts.
2B50(L2) 1060 _ A1060 __ A0 _
1200(L5) 1200 _ A1200 Al99 1200 _ 1C
6061(LD30) 6061 1Mg1SiCu A6061 AlMg1SiCu 6061 AЛ33 H20 Used for punching, bending and other stamping parts。
5A02LF2)) 5052 _ 5052 AlMg2.5 5052 Amg NS4

Copper and Copper Alloy Plates 

GB ASTM ISO JIS DIN BS EN T mm
T2 C11000 Cu-FRHC C1100 E-Cu58 C101 - T=1.0; T=2.0
Commonly used in parts on power supply that need to carry high current
H68 C26200 —— C2620 CuZn33 —— CW506L T=1.0; T=2.0
H62 C28000 CuZn40 C2800 —— CZ109 CW509L T=1.0; T=2.0
Force parts for deep drawing and bending, such as ducts, confluence, etc.

2.According to the drawing materials and technical requirements provided by the customer, select the appropriate forming process(such as stamping, bending, punching, deep drawing and welding).


  • Previous:
  • Next:

  • Write your message here and send it to us